Q4: How to generate time-lapse photography files?Ī: The camera file will be generated only after the document is printed, and the time-lapse camera file will not be generated if the printing is stopped in the middle, the power is off, the camera is unplugged, etc.Ī: 1. Check the correctness of the password and whether the router is normal. Try to search for other Wi-Fi and connect to confirm whether it can be connected normally (the current device supports WPA2 encryption method, but does not support WPA3, and only supports the 2.4G frequency band) Ģ. It is recommended to use Creality Print slicing software, which already adds the required starting Gcode commands by default.Ī: 1. Q2: When resuming printing after a pause, an error is reported out of range?Ī: Open the printer setting option of the slicing software, and add the G90 command before other motion commands in the initial Gcode. If they do not match, you need to re-adjust the parameters and re-slicing. A: Check whether the relevant parameters of the slicing file match the connected printer model, such as whether to enable retraction, retraction distance, retraction speed, printing speed, and other parameters.

Geek remover